基于自适应阈值的FAST特征点提取算法

FAST特征提取算法阈值选取固定,因此不能满足不同图像的特征点抽取要求,并且提取的结果存在着多个特征点块的现象。针对这些缺陷,首先采用动态全局阈值对原始灰度图像进行初步提取得到候选特征点,然后采取动态局部阈值和非极大值抑制法进一步对候选特征点进行筛选,从而达到自适应选取阈值和抑制多个特征点块的目的。实验表明,改进后的算法稳定性高,对不同光照和对比度情况下有一定的适应能力,并且运算量相对比于其他一些特征提取算法要小得多,满足实时应用的要求。     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...     

气体化学反应速率的 DSMC 方法

为预报化学反应过程,应用ＤＳＭＣ方法研究了双原子分子的离解反应,讨论了高温情况下（Ｔ～Ｅａ／ｋ）采用由实验测定得到的反应速率与气体温度间Ａｒｒｈｅｎｉｕｓ经验关系式的可靠性问题,分析了振动热非平衡效应对于离解反应速率的影响,给出了由ＤＳＭＣ方法得到的离解反应速率与气体温度的关系曲线。     

后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

Optimal (τ, T) opportunistic maintenance of a k‐out‐of‐n:G system with imperfect PM and partial failure

The opportunistic maintenance of a k‐out‐of‐n:G system with imperfect preventive maintenance (PM) is studied in this paper, where partial failure is allowed. In many applications, the optimal maintenance actions for one component often depend on the states of the other components and system reliability requirements. Two new (τ, T) opportunistic maintenance models with the consideration of reliability requirements are proposed. In these two models, only minimal repairs are performed on failed components before time τ and the corrective maintenance (CM) of all failed components are combined with PM of all functioning but deteriorated components after τ; if the system survives to time T without perfect maintenance, it will be subject to PM at time T. Considering maintenance time, asymptotic system cost rate and availability are derived. The results obtained generalize and unify some previous research in this area. Application to aircraft engine maintenance is presented. © 2000 John Wiley & Sons;, Inc. Naval Research Logistics 47: 223–239, 2000     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

间歇采样转发假目标对CFAR检测影响分析

分析间歇采样转发形成的假目标干扰对雷达CFAR检测的影响和间歇采样转发假目标生成机理,给出间歇采样转发假目标产生方法。在此基础上,以雷达一次搜索周期内虚警、漏警造成的检测代价作为检测性能指标,分别分析单元平均恒虚警检测器、有序恒虚警检测器、剔除和平均恒虚警检测器在间歇采样转发假目标干扰下的检测代价。着重分析间歇采样转发干扰关键参数对检测代价的影响。仿真结果表明,间歇采样转发产生的多个假目标显著提高了雷达的检测代价,检测代价受转发占空比、转发功率的影响较大,而受转发频率影响较小。在三种恒虚警检测器的对比中,剔除和平均恒虚警检测器相对于另两种检测器的检测代价更大些。     

装备维修中备件需求率的预计方法

通过研究装备维修过程中器件的固有可靠性和维修性,着重分析了影响维修器件需求率的主要因素.利用系统建模和仿真的方法,分别针对耗损类型器件和可修复类型器件建立了相应的需求数学模型,最后给出了维修备件需求率的预计方法.     

自适应均衡器非维纳效应的仿真研究

窄带干扰条件下,自适应滤波器产生非维纳效应。在分析非维纳效应产生机理的基础上,详细仿真研究了强单音干扰条件下,自适应均衡器的收敛和跟踪性能。通过研究得出了一些新的结论:多径和干扰的功率严重影响自适应均衡器的收敛速度,而干扰的频率对收敛速度几乎没有影响;固定的强单音干扰对自适应滤波器的信道跟踪性能影响较小;慢变的强单音干扰对跟踪性能影响较小,快变的单音干扰将对跟踪性能造成严重影响。     

一类半线性抛物型方程组解的爆破速率估计

研究了一类具有不同类型反应项的半非线性抛物型方程组初边值问题,这类模型主要描述两种物质燃烧过程中的热传递规律。通过运用古典计算技巧和偏微分方程的定性分析手法,得到了这类半非线性抛物型方程组初边值问题解的爆破速率估计。